design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer hybrid aluminum electrolytic capacitors/za 33 za e capacitance ( f) rated voltage mark series identification lot number negative polarity marking (? a 0.2 w () reference size l d 0.5 h b 0.2 (i) k (p) (i) + 0.3 max. pressure relief ( 10 and larger) features endurance: 5000 h at 105 c low esr and high ripple current (lower esr than current v-fp, more than twice high ripple) hi gh voltage (to 80 v) equivalent to conductive polymer type aluminum electrolytic capacitor (there are little characteristics change by temperature and frequency) rohs directiv e compliant surface mo unt type series: za type: v high temper ature lead-free re ow speci? cations category temp. range 55 c to +10 5 c rated w.v.range 25 v.dc to 80 v.dc nomi nal cap.range 10 f to 330 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 ( a) after 2 minutes (whichever is greater) tan please see the attached standard pr oducts list endurance the capacitor shal l be subjected to application of the d.c. voltage with full rated ripple current at +105 c for 5 000 hours. after stabil izing at room temperature(+15 to 35 c), the capacitor shall not exceed the speci ed limits. (the su m of dc voltage and ripple peak voltage shall not exceed the rated voltage.) capacitance change ?0 % of initial measured value tan < 200 % of initial speci ed value e. s. r. < 200 % of initial speci ed value dc leakag e current < initial speci ed value esr after endurance ( /100 khz) ( 40 c) size code cdd8fg 2.0 1.4 0.8 0.4 0.3 shelf life after storag e for 1000 hours at +105 c 2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci ed in endurance. (with voltage treatment) resistance to soldering heat after re ow soldering and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change ?0 % of initial measured value tan < initial speci ed value dc leakag e current < initial speci ed value di men sions in mm (not to scale) marking example:25 v 33 f marking color : black rated volt age mark (mm) frequency (hz) 120 1 k 1 0 k 100 k to correction factor 0.10 0.30 0.60 1.00 frequency correction factor for ripple current size code dl a, b h i w p k c 5.0 5.8?.3 5.3 6.5 max. 2.2 0.65?.1 1.5 0.35 - 0.20 d 6.3 5.8?.3 6.6 7.8 max. 2.6 0.65?.1 1.8 0.35 - 0.20 d8 6.3 7.7?.3 6.6 7.8 max. 2.6 0.65?.1 1.8 0.35 - 0.20 f 8.0 10.2?.3 8.3 10.0 max. 3.4 0.90?.2 3.1 0.70?.2 g 10.0 10.2?.3 10.3 12.0 max. 3.5 0.90?.2 4.6 0.70?.2 + 0.15 + 0.15 + 0.15 e 25 v v 35 v h 50 v j 63 v k 80 v sep. 2012 04
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer hybrid aluminum electrolytic capacitors/za standard products yyyyyyy please refer to the page of ?e? ow pro? le?and ?he taping dimensions? endurance : 105 ? 5000 h w.v. cap. ( 20 %) case size speci cation part no. (rohs:compliant) re ow min. packaging q'ty dia. length size code ripple current (100 khz) (+105 ?) e.s.r. (100 khz) (+20 c) tan (120 hz) (+20 c) taping (v) (?) ( mm) (mm) (ma r. m.s.) ( m )(pcs) 25 33 5 5.8 c 900 80 0.14 eehza1e330r (5) 1 000 56 6.3 5.8 d 1300 50 0.14 eehza1e560p (5) 1 000 100 6.3 7.7 d 82 000 30 0.14 EEHZA1E101XP (5) 900 220 8 10.2 f 2300 27 0.14 eehza1e221p (6) 500 330 10 10.2 g 2500 20 0.14 eehza1e331p (6) 500 35 22 5 5.8 c 900 100 0.12 eehza1v220r (5) 1 000 27 6.3 5.8 d 1300 60 0.12 eehza1v270p (5) 1 000 47 6.3 5.8 d 1300 60 0.12 eehza1v470p (5) 1 000 68 6.3 7.7 d 82 000 35 0.12 eehza1 v 680xp (5) 900 150 8 10.2 f 2300 27 0.12 eehza1v151p (6) 500 270 10 10.2 g 2500 20 0.12 eehza1v271p (6) 500 50 10 5 5.8 c 750 120 0.10 eehza1h100r (5) 1 000 22 6.3 5.8 d 1100 80 0.10 eehza1h220p (5) 1 000 33 6.3 7.7 d8 1600 40 0.10 eehza1h330xp (5) 900 68 8 10.2 f 1800 30 0.10 eehza1 h680p (6) 500 100 10 10.2 g 2000 28 0.10 eehza1h101p (6) 500 63 10 6.3 5.8 d 1000 120 0.08 eehza1j100p (5) 1 000 22 6.3 7.7 d 81500 8 0 0.08 eehza1j220xp (5) 900 33 8 10.2 f 1 600 40 0.08 eehza1j330p (6) 500 56 10 10.2 g 180 030 0.08 eehza1j560p (6) 500 80 22 8 10.2 f 1 550 45 0.08 eehza1k220p (6) 500 33 10 10.2 g 170 036 0.08 eehza1k330p (6) 500 sep. 2012 04
|
